TRIAD 48kW Quad Hub Motor 12,000W EV Conversion Kit
96V to 144V
146kph hub Motor with SIAPT96800 controller power train kits for High Power electric car
The 96V 12000W high-power hub motor is designed for long endurance, which can make you fully enjoy the pleasure of driving your custom electric vehicle. The aluminium alloy central controller is of high quality and is extremely durable, which can steadily control the start/stop, advance/retreat, and speed of the motor as well as other parameters of operation of the electric Car.
Energy Conservation & Environmental Protection As a new form of transportation, the electric car is powered by a battery that converts electrical energy into mechanical energy via the quad hub motors. Unlike gas-fired vehicles, electric cars are environmentally friendly, which can save energy and reduce carbon dioxide emissions while consuming less electricity.
We always recommend checking the goods when they are first received and testing them on the car. If you have any questions, please do not hesitate to contact us, we will reply in the first time. To provide you with the best customer service.
- TRIAD 12000W 273 70H V4 E-Car Hub Motor
- Motor Design: Single axle without rim
- Matched Wheel: ≥14inch Car Wheel, PCD customizable, CB ≥60mm (PCD 5*112mm, CB60mm as default)
- Magnet Height: 70mm, 16 pole pairs
- Stator: Aluminium Core
- Rated Power: 12000W (24kW peak in few seconds)
- Rated Voltage: 96V as default (48V-144V, optional)
- Speed: 120KPH as default (70-130KPH, optional)
- kV: 10.0/10.28(as default)/10.42/11.67/12.5/14.58/ etc
- Max Torque: more than 350N.m
- Max Efficiency: 86-91%
- Peak Battery Current: 250A (96V)
- Suggest Peak Phase Current: 530-700A
- Thermic Probe: KTY83/122 (as default, optional)
- Brake Type: Disc brake, PCD4x114.3mm-M12, CB 67mm(as default)
- Dual Hall Set with waterproof connectors
- 2x12mm2; Cross Section of Phase wire (not include insulation layer)
- Hall Sensor Phasing angle: 120 degree
- Waterproof Grade: IP54
The Electric Car Kit includes most of things needed (except battery/charger) to convert your standard car into a top-of-the-line performance electric car, which delivers unequalled performance and reliability.
You'll be out cruising along at approx. 50-82mph / 80-130km/h speed.
1. Simple installation, to make an electric car. Gearbox, transmission shaft, clutch are not needed. Which save space and reduces vehicle weight.
2. It should be installed inside the wheels, and allows for easy hybrid car conversion.
3. 4pcs 12kw motor bearing 1000-1300kg, can reach at 130kph max. speed.
4. Easily to make 4-wheel drive, which could spot turn.
5. Support regenerative braking
6. High efficiency: 85~92%
1. Battery and charger are not included in package as standard (however we can supply a suitable battery for your needs, just select from the dropdown menu).
2. The battery voltage depends on your application. (72V-144V) ( With a higher voltage battery pack and suitable high voltage controller you can effectively overclock the motors thus providing a significant increase in power output)
One set including below kits:
1. 4pcs X TRIAD 12000W RMS 273 V4 Electric Motorcycle Hub Motor
2. 4pcs X SIAPT96800 96V Sinusoidal Wave BLDC Motor Controller
3. 1pcs X 0-5V Electric Car Throttle Pedal
1. TRIAD 12000W 273 V4 Electric Motorcycle Hub Motor
1. TRIAD 12000W 273 70H V4 E-Car Hub Motor
Motor Design: Single axle without rim
Matched Wheel: ≥14inch Car Wheel, PCD customizable, CB ≥60mm (PCD 5*112mm, CB60mm as default)
Magnet Height: 70mm, 16 pole pairs
Stator: Aluminium Core
Rated Power: 12000W (24kW peak in few seconds)
Rated Voltage: 96V as default (48V-144V, optional)
Speed: 120KPH as default (70-130KPH, optional)
kV: 10.0/10.28(as default)/10.42/11.67/12.5/14.58/ etc
Max Torque: more than 350N.m
Max Efficiency: 86-91%
Peak Battery Current: 250A (96V)
Suggest Peak Phase Current: 530-700A
Thermic Probe: KTY83/122 (as default, optional)
Brake type: Disc brake, PCD4x114.3mm-M12, CB 67mm(as default)
Dual Hall Set with waterproof connectors
2x12mm2; Cross Section of Phase Wire (not include insulation layer)
Hall Sensor Phasing angle: 120 degree
Waterproof Grade: IP54
Package Dimension: 48cm*50cm*54cm/piece(wodden package).
2.SIAPT96800 96V Sinusoidal Wave BLDC Motor Controller
3.0-5V Electric Car Throttle Pedal
Optional appearance, drawing, performance curve/test report are available.
If you need more technical information, please feel free to contact us.
We will give you reply in 12hours.
Q1. Are you trader or manufacture?
A: We're manufacture.
Q2. How long is your production time?
A: Generally, the production period is 12-14 working days(6 working days per week).
The specific delivery time depends on the items and the quantity of your order.
Q3. How long is your warranty time?
A: For motor, the warranty time is one year and three months. For other parts, the warranty time is one year.
Q4. About Customs Clearance
For some special countries with strict customs for import, so pls. confirm it firstly to us that you have ability to do customs clearance, otherwise we will not take on heavy responsibilities for this issue, return money and goods are not support.
Special countries list:
Argentina, Brazil, Egypt, Turkey, Iran, Portugal, Romania, Kazakhstan, Ukraine, Yemen etc.
Some countries name not listed, the salesman will inform you in time if you placed the order online directly. Thank you for your understanding.
Q. Motor Order:
1. please contact seller confirm the parameter, otherwise will make as default.
2. please extended 15 days more at least for order prepare when motor no in stock. (most of motor is customized based on application, without in stock).
3. when place order please leave email address, for seller provide manual.
4. please read manual careful before wiring motor and controller, and if meet problem please contact seller in time, and don't disassembly cargo without seller permit, otherwise there will be no warranty.